Renault issue team statement

The Renault Formula One team and parent company Renault issued the following statement on Wednesday:

The decision of the Federation International de l’Automobile (FIA) to introduce two sets of Formula One technical regulations for the 2010 Formula One season has caused the Renault Group to reconsider its entry in next year’s FIA Formula One World Championship.

There is frustration that FOTA’s constructive proposals, including major cost saving measures to be adopted progressively between 2009 and 2012, which were carefully constructed by FOTA members, have been completely ignored without any form of consultation by the FIA with the teams.

It should be stressed that FOTA has set the same, if not lower, financial objective as the FIA, but Renault strongly believes that this must be introduced through a different procedure agreed by all parties.

Renault also believes that it is paramount that the governance of the sport is coordinated with a spirit of consultation with all parties (FIA, FOM, FOTA) in order to achieve a better balance between the costs and the revenues. Renault is also of the firm view that all entrants in the World Championship must adhere to and operate under the same regulations.

President of the ING Renault F1 Team, Bernard Rey, commented: “Renault has always considered Formula One as the pinnacle of motor sport and the perfect stage to demonstrate technical excellence. We remain committed to the sport, however we cannot be involved in a championship operating with different sets of rules, and if such rules are put into effect, we will be forced to pull out at the end of this season.”

ING Renault F1 Team Managing Director, Flavio Briatore, commented: “Our aim is to reduce costs while maintaining the high standards that make Formula One one of the most prestigious brands on the market. We want to achieve this in a coordinated manner with the regulatory and commercial bodies, and we refuse to accept unilateral governance handed out by the FIA. If the decisions announced by the World Council on the 29th of April 2009 are not revised, we have no choice but to withdraw from the FIA Formula One World Championship at the end of 2009.”

Source:
http://www.formula1.com

Suzuki Heat 125

Technical Specifications
Engine
Engine type
Bore x Stroke
Displacement
Compression ratio
Max Power
Max Torque
Carburetor
Lubrication system
Transmission
Clutch
Ignition type
Starting system
Air cleaner
Battery

SOHC, 4-stroke, single cylinder, air cooled
53.5 x 55.2 mm
124 cm3 (cc)
9.6:1
13.8bhp @8,500rpm
13.4Nm @6,000rpm
VM18
Wet sump
5-speed constant mesh
Wet multi-plate type
Electronic Ignition (CDI)
Kick starter
Non-woven fabric element
12V 9.0kC (2.5 Ah)/10HR
Dimensions
Overall length
Overall width
Overall height
Seat height
Wheelbase
Ground clearance
Dry mass
Fuel capacity
Suspension (front)
Suspension (rear)
Tyre (front)
Tyre (rear)
Brake (front)
Brake (rear)

2040 mm
770 mm
1085 mm
790 mm
1240 mm
155 mm
110 kgs
12 liters
Telescopic, Coil spring, Oil damped
Swing-arm type, Coil spring, Oil damped
2.75 -18 42P
3.00 -18 52P
Drum brake (130 mm)
Drum brake (130 mm)

Image:
http://www.zimbio.com

Source:
http://www.suzukimotorcycle.co.in

Suzuki Intruder M1800R

Technical Specifications
Engine
Engine type
Bore x Stroke
Displacement
Compression ratio
Transmission
Clutch
Ignition type
Starting system

Four stroke, 2-cylinder, liquid-cooled, DOHC, 54° V-twin
112.0 mm x 90.5 mm
1783 cm3 (cc)
10.5:1
5-speed constant mesh
Wet multi-plate type
Electronic ignition (Transistorised)
Electric starter
Dimensions
Overall length
Overall width
Overall height
Seat height
Wheelbase
Ground clearance
Curb mass
Fuel capacity
Suspension (front)
Suspension (rear)
Tyre (front)
Tyre (rear)
Brake (front)
Brake (rear)

2480mm (97.6in)
875mm (34.4in)
1185mm (46.7in)
705mm (27.8in)
1710mm (67.3in)
130mm (5.1in)
347kg (765lbs)
19.5 litres (5.2 US gallons)
Inverted telescopic, coil spring, oil damped
Link type, coil spring, oil damped
130/70R18 M/C 63V tubeless
240/40R18 M/C 79V tubeless
Disc, twin
Disc

Image:
http://www.suzuki-gb.co.uk

Source:
http://www.suzukimotorcycle.co.in

Job Vacancy for PT Indospring, Tbk (Indonesia)

We are the leading automotive parts manufacture in Gresik are currently seeking highly qualified and result oriented persons with long term career objective to support our growth and to be part of our winning team.

I.Engineering Ass. Manager-Jawa Timur - Gresik

Requirements:

* Male, S1 degree in Mechanical Engineering
* Mastery in Product Development Process For New Varian, Design & Trial Product
* Minimum 5 years hand-on experience in the same position
* Mastery in Auto Cad & Minitab program
* Familiar with ISO 9001 : 2000
* Strong reading for M/E drawing and specification
* Independent, active, dynamic and good interpersonal skill
* Strong managerial and leadership

II.PPIC Ass. Manager (PPIC-AM)-Jawa Timur - Gresik

Requirements:

* Male, S1 degree in Industrial / Mechanical Engineering / Statistic
* Familiar with MRP and ISO 9001:2000
* Minimum 5 years hands-on experience in the same position
* Having good capability in Production Planning System / Inventory Control
* Computer literacy, preferable MS Office Excel plus
* Independent, active, dynamic and good interpersonal skill
* Strong managerial and leadership

III.PPIC Staff-Jawa Timur - Gresik

Requirements:

* Male, Hold D3 / S1 degree in Industrial / Mechanical Engineering / Statistic
* Familiar with MRP and ISO 9001:2000
* Minimum 1 years hands-on experience in the same position
* Having good capability in Production Planning System / Inventory Control
* Computer literacy preferable MS Office Excel plus
* Independent, active, dynamic and good interpersonal skill

IV.Production Shift Leader-Jawa Timur - Gresik

Requirements:

* Male, Hold D3/S1 degree in Industrial / Mechanical Engineering
* Minimum 1 year hand-on experience in the same position
* Mastery in Production Process
* Familiar with ISO 9001 : 2000
* Computer literacy
* Can work under pressure and overtimes will be preferred
* Independent, active, dynamic and good interpersonal skill

V.Production Shift Leader-Jawa Timur - Gresik

Requirements:

* Male, Hold D3/S1 degree in Metallurgy / Mechanical / Statistic / Industrial / Engineering
* Familiar with ISO 9001 : 2000
* Minimum 1 years hands-on experience in the same position
* Familiar with QA/QC Inspection System, dimension measurement and calibration process system especially for mechanical tools
* Strong reading for M/E drawing and specification
* Computer literacy

Interested applicants are invited to submit their application and detailed CV by email to:

hrd@indospring.co.id
Or
Human Resources Department
PO BOX 112 Gresik

Source:
http://datalowongankerja.com

Job career at Hotel Vila Ombak (Indonesia)

Hotel Vila Ombak is the first international hotel on magical island of Gili Trawangan with 6.5 hectares of productive area, a 10 minutes boat-ride off the North-western coastline of the main island of Lombok.

The hotel features 110 air-conditioned rooms traditionally inspired comfortable Lumbung Huts and Bungalows, a concept in which the traditional Sasak architecture of Lombok is combined with modern amenities in a very unique way with the natural beauty of a small exotic tropical island.

The traditional Lumbung roof functions as an upper floor bedroom and can be reached from the adjacent big balcony; a spacious open-air living room-area is underneath. The large semi-open bathroom at the backside can be accessed from the bedroom via a staircase (from an opening in the floor of the bedroom) or from the downstairs living area. The open-air living room is located on the ground floor under the Lumbung roof and terrace with an adjacent semi-open bathroom. It is equipped with a Balé, an elevated lounging area (a large day-bed with pillows). A mosquito net is available on request, though rarely needed).

The family bungalow rooms are half houses that have large sleeping and living areas, they also have a Balé (a spacious lounging area) integrated in the room which can easily be used as a bed for children or for an extra person.

I.Chief Engineering-(Nusa Tenggara Barat - Lombok)

Requirements:

* Age between 30-45 years old
* Experience in similar capacity minimal 3 years
* Good Leadership and have an experience with Training skills
* Able to works flexible hours
* Creative, Organized, Enthusiasm and Motivated
* Good English (written and spoken)

II.Food & Beverage Manager-(Nusa Tenggara Barat - Lombok)

Requirements:

* Age between 30 – 45 years old
* Experience in similar capacity minimal 3 years
* Good Leadership and have an experience with Training skills
* Able to works flexible hours
* Creative, Organized, Enthusiasm and Motivated
* Good English (written and spoken)

III.Restaurant & Bar Manager - (Nusa Tenggara Barat - Lombok)

Requirements:

* Age between 30-45 years old
* Experience in similar capacity minimal 3 years
* Good Leadership and have an experience with Training skills
* Able to works flexible hours
* Creative, Organized, Enthusiasm and Motivated
* Good English (written and spoken)

IV.Executive Housekeeper - (Nusa Tenggara Barat - Lombok)

Requirements:

* Age between 30 – 45 years old
* Experience in similar capacity minimal 3 years
* Good Leadership and have an experience with Training skills
* Able to works flexible hours
* Creative, Organized, Enthusiasm and Motivated
* Good English (written and spoken)

V.SPA Manager - (Nusa Tenggara Barat - Lombok)

Requirements:

* Female
* Age between 30 – 45 years old
* Experience in similar capacity minimal 3 years
* Good Leadership and have an experience with Training skills
* Able to works flexible hours
* Creative, Organized, Enthusiasm and Motivated
* Good English (written and spoken)
* Attractive & good personality

Your application should be sent to :
HRD DEPT.
HOTEL VILA OMBAK
GILI TRAWANAN ISLAND
LOMBOK 83352
usman@hotelombak.com

Architect at Habrisalam Architect (Malaysia)

Job Description :
Architect with diligent design skill in multi-dicipliniary field. Responsible to liase with authorities, coordinate submissions and attend meetings.
Job Requirements :
Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Architecture or equivalent.
Required skill(s): Sketchup, Adobe Photoshop, 3 D Max, Autocad, Adobe Illustrator
Required language(s): Bahasa Malaysia, English
At least 1 year(s) of working experience in the related field is required for this position.
Applicants must be willing to work in Johor Bahru.
Preferably Senior Executives specializing in Architecture/Interior Design or equivalent.
Full-Time positions available.
Must be willing to travel.

Closing Date: 1-6-09


Source:
http://ejobsvacancy.com

Engineer at Aerocut Engineering (Malaysia)

Job Description :
Candidate must posses a recognised degree in Robotic Science / Computer Science or its equivalent
Advanced software development ability in C/C++ language
Has experience in using and developing software on the Linux Operating System
Preferably with some related field experience
Positive attitude, initiative and able to work independen
Job Requirements :
Candidate must posses a recognised degree in Robotic Science / Computer Science or its equivalent
Advanced software development ability in C/C++ language
Has experience in using and developing software on the Linux Operating System
Preferably with some related field experience
Positive attitude, initiative and able to work independen
Contact Information :

source by : jobstreet.com.my
- Top job search site for career minded professionals seeking employment in
Asia.

Closing Date: 1-6-09

Archive