Aprilia Atlantic 500 (2004)

Specfications

Engine:
Engine Type	Single-Cylinder
Cylinders	1
Engine Stroke	4-Stroke
Horsepower (bhp/kW)	39 / 29
Horsepower RPM	7250
Torque (Ft Lbs/Nm)	29.5 / 40
Torque RPM	5500
Cooling	Liquid
Valves	4
Valves Per Cylinder	4
Valve Configuration	SOHC
Bore (mm/in)	92 / 3.6
Stroke (mm/in)	69 / 2.7
Displacement (cc/ci)	460 / 28.1
Compression Ratio	10.5:1
Starter	Electric
Fuel Requirements	Regular
Ram Air Induction	No
Fuel Type	Gas
Fuel Injector	Yes
Carburetor	No
Carburetion Type	Fuel Injected
Transmission:
Transmission Type	Continuously Variable (CVT)
Primary Drive (Rear Wheel)	Belt
Primary Drive (Engine / Transmission)	Gear
Reverse	No
Wheels & Tires:
Wheels Composition	Aluminum
Tube / Tubeless	Tubeless
Front Wheel Width (in)	3
Rear Wheel Width (in)	3.75
Chromed	No
Front Tire Width	120
Front Tire Aspect Ratio	70
Front Wheel Diameter	15
Rear Tire Width	140
Rear Tire Aspect Ratio	60
Rear Wheel Diameter	14
Front Tire (Full Spec)	120/70 R15
Rear Tire (Full Spec)	140/60 R14
Brakes:
Front Brake Type	Dual Disc
Front Brake Diameter (in/mm)	10.2 / 260
Front Caliper Pistons	4
Rear Brake Type	Disc
Rear Brake Diameter (in/mm)	8.7 / 220
Rear Caliper Pistons	2
Suspension:
Front Suspension Type	Telescopic Fork
Front Suspension Size (in/mm)	1.6 / 40
Front Travel (in/mm)	3.9 / 100
Front Adjustable Fork Pre-Load	No
Front Adjustable Rebound Damping	No
Front Central Suspension Strut	No
Steering Damper	No
Rear Suspension Type	Twin Sided Swing Arm
Rear Adjustable Shock / Spring Pre-Load	Yes
Rear Adjustable Rebound Damping	No
Number Rear Shock Absorbers	2
Steering:
Steering Control	Handlebar
Technical Specifications:
Length (ft)	7.38
Width (in/mm)	30.3 / 770
Height (in/mm)	56.5 / 1435
Wheelbase (in/mm)	62.1 / 1575
Length (ft/ft)	7
Length (ft/in)	5
Dry Weight (lbs)	425
Fuel Capacity (gal/l)	3.2 / 12
Fuel Capacity Reserve (gal/l)	1.1 / 4
Engine Displacement to Weight (cc)	1.08
Horsepower To Weight (hp)	0.09
Exterior:
Rear Fender	Standard
Stand Type	Center
Lower Fairing	Standard
Handlebars	Standard
Upper Fairing	Standard
Wind Deflector Material	Plastic
License Plate	Standard
Instrumentation:
Digital Instrumentation	Standard
Tachometer	Standard
Trip Odometer	Standard
Trip Computer	Standard
Speedometer	Standard
Identification:
Generic Type (Primary)	Touring Scooter
Manufacturer Country	Italy
Manufacturer Recommend Minimum Age	16
MIC Model Segment	SCOOTER
NADATrimID	17258
CRS -> NADA Map	6200016659
Lights:
Halogen Headlight (s)	Standard
Convenience:
Power Outlet	Standard

Image:
http://image.motorcyclistonline.com

Source:
http://www.motorcycle.com

Read More

Triumph Rocket III

Technical Specifications

Engine Engine type Bore x Stroke Displacement Compression ratio Max power Max torque Idling Speed Transmission Clutch Starting system Fuel system Ignition	Liquid-cooled, DOHC, Longitudinal in-line 3-cylinder, 12 valves 101.6 mm x 94.3 mm 2294 cm3 (cc) 8.7:1 142PS (140bhp) at 5,750 rpm 200Nm (147ft.lbf) at 2,500 rpm 1,200min-1 Manual 5-Speed Wet, multi-plate Electric starter Multipoint sequential electronic fuel injection Digital - inductive type - via electronic engine Management system
Dimensions Overall length Overall width Overall height Seat height Wheelbase Colors Dry weight Fuel capacity Suspension (front) Suspension (rear) Tyre (front) Tyre (rear) Brake (front) Brake (rear)	2,480 mm 880 mm 1,150 mm 740 mm 1,690 mm Jet Black, Cardinal Red 320 kg 25 litres 43 mm upside down forks Chromed spring twin shocks with adjustable preload Alloy 5-spoke, 17x3.5in, 150/80-15M/C (74S) Alloy 5-spoke, 16x7.5in, 240/500 V16 Twin 320 mm floating discs, 4 piston calipers Single 316 mm disc, 2 piston calipers

Source:
http://www.triumphrocket.com

Read More

Champion Waterflood Sr Planner at Joffren Omar Co Sdn Bhd

Purpose of Job
BSP has a large portfolio of projects distributed over 4 main Assets, both green field as well as many brown field and rejuvenation projects. In 2006 it was decided to set up a separate organisation for the execution of all Major projects in BSP to improve project delivery. The largest and one of the most challenging Major projects is the Champion Waterflood project. This project is well progressing through the Select phase and needs a dedicated Senior Planner. The project covers the design, fabrication and installation of a multitude of platforms and related pipelines, power cables and umbilicals as well as upgrade and extension of many existing facilities. Projects in BSP are typically executed under BSP management i.e. all design, fabrication, procurement and installation works were done in house or under BSP direct supervision and therefore a very hands on approach is required. Fabrication is executed under a frame agreement in BSP’s own fabrication yard in Kuala Belait.

The nature of the project (heavy brownfield bias early in the project) is such that meticulous project planning is required to minimise disruption of ongoing operations.

The project Senior Planner develops, maintains, updates and improves the Integrated Project Plan showing key & relevant activities in levels of details as required. Coordinate and incorporate individual approved project plan data, maintain alignment & high level log of changes, assumptions and KPIs. Provide necessary planning direction and support to contractor planners.

Dimensions
The Champion Field is the largest field in the East Asset Unit and one of the largest in BSP. It is a geologically complex field containing some 30 fault blocks and more than 500 reservoirs and has been producing since the early ‘70s. Though with a long production history and the first water injection scheme implemented in the mid ‘80s, recovery from the field has remained less than 30%. The implementation of water injection in Block 13/14 and the de-bottlenecking of the existing WI plant over the last 2 years aimed at providing an injection capacity of 20,000 m3/d marked the start of a commitment to pursue secondary recovery in the Champion Field. Over the next 5 years, it is planned to significantly expand the field development study efforts in Champion so that recovery can be maximised and the development plan optimised and in full synergy with the different areas of the field as well as other fields within the asset unit. This project will be one of the most important projects in BSP’s forthcoming business plan and is of significant strategic importance to both shareholders (Shell and Brunei government) from the perspective of achieving the aspired Reserves Replacement as well as sustaining BSP’s production.

The Facilities project value is in excess of 1 Billion BND.

Principal accountabilities
To lead the Project Planning team and activities.
To develop Project Plans for the project to allow all critical path activities of the project are identified•

To develop plan, progress reports and S-curves (in P3E) and develop link with SAP for cost reporting• To incorporate procurement plans and drilling schedules in project plans•

To conduct QC, realism and do-ability check on all internally and externally developed plans.
To establish new and maintain existing Planning Best Practices.

Experience
• A qualified Planning Engineer with a minimum of 15 years experience in similar Oil and Gas Engineering Projects with significant brownfield scope.
• Have been working in other areas of Project Engineering - Design, Construction and Commissioning.
Expert in use of Cost Planning Tools, Methods, Soft ware, e.g, MS Project, Primavera P3e, Network Development, Critical Path Analysis, Trend Analysis, Schedule Crushing, Recovery Plans etc. plus other BSP system (SAP, IPFE) Pertmaster, Monte Carlo etc.

Special Abilities
• The incumbent should be capable of working under considerable pressure whilst maintaining the ability to plan, co-ordinate, motivate and direct people.
• Full understanding of HSE management principles.
• Must have a delivery track record.

Source: http://www.learn4good.com

Read More

JD Senior Simulator Engineer at Joffren Omar Co Sdn Bhd

The Role:
As part of Simulator operations team, you will be responsible for maintaining and providing a serviceable training device for RBA and third-party flight crew. The duties will include managing and overseeing all aspect of technical operations and projects to ensure certification approval is valid and in compliance with UK Civil Aviation Authority requirements –JSS STD.
Brief Job Description:
o Ensure simulator availability with 98% dispatch reliability for training.
o Ensure all maintenance tasks are carried out in a safe and efficient manner in accordance with IAW maintenance manuals and procedures.
o Monitoring, reviewing and clearing ADDs while ensuring simulator operations are complied with Aviation Authorities’ requirement.
o Provisioning of manpower, technical support and logistical requirements within operational and budgetary constraint.
o Attend to AOG situation, liaise with vendors for technical support required and coordinate with relevant parties and customers for immediate training requirements.

Requirement:
o Licensed Aircraft Engineer in Avionics or a Technical degree with 7 years relevant simulator experience OR
o Minimum Higher National Diploma or its equivalent in Electrical and Electronic Engineering / Computing with 10 years experience in simulation industry with knowledge of aircraft maintenance environment.
o Knowledge of Unix. C or FORTRAN programming language is an advantage.
o Fundamental and comprehensive skills in troubleshooting electrical, electronics, mechanical and software defects.
o Good command of written and spoken English, and good leadership and analytical skills are required.
o Ability to work under tight schedules.

Source: http://www.learn4good.com

Read More

Shipping Manager - based in Brunei

Job Description
Liaison with forwarders and custom port authorities to ensure timely delivery (inbound and outbound shipping arrangements).
Preparation and timely dispatch of shopping documents to consignees before cargo arrival at destination.
Handing of export L/C and banking documentations, to ensure compliance with all contractual terms, L/C conditions, international trading guidelines and local Trade and Customs regulations.
Working closely with buyers, banks, supply chain and project management teams to ensure accurate and timely order fulfillment and delivery.
Procurement of raw materials from vendors
Negotiate for competitive rates with service providers.
Evaluate current structure and implement continuous improvement in shipping procedures.
Other ad hoc duties.

Job Requirements
Degree in business studies or related discipline.
Minimum 1-3 years experience in shipping and L/C documentation.
Good command in English (spoken and written), abilities to interact with Chinese speaking client is a added advantage.
Familiar with all aspects of shipping procedures, documentation, marine insurance, letter of credit etc.
Knowledge of MS word, Excel, PowerPoint applications.
Singapore citizen or PR.
Positive attitude with a pleasant personality.
Highly motivated and a team player.
Able to start work immediately or within a short notice.

Source: http://www.learn4good.com

Read More

Marketing Executive Vacancy PT ACF

Our company looking for a candidate for : Marketing Executive
With qualification :
1. Male/ Female, max. 25 years old
2. Have good communications & interpersonal skill
3. Highly self motivated & initiative, independent, positive attitude, mature
4. Able to work in tight schedule, and overtime
5. Minimum D3
6. Compensation : Sallary, Commission, Bonus, Company transportation.

Sending your CV to :
HRD PT. ACF
e-mail : hrd.pt.acf@gmail. com

Source: http://jakjobs.com

Read More

Brunei Jobs Opportunities

A subsidiary of Zurich Multidiscipline Design Engineering and Project Management Consultant in Brunei Darussalam has vacancies to be filled for :

1. Process Checker
2. Control & Automation (Instrument) Checker
3. Mechanical Checker
4. Quality Assurance Engineer

So, if you posses the above criteria, minimum 5 yrs of experience in OG industry (preferably in engineering consultant company), hands-on and keen to take up this challenge, kindly forward your detailed resume stating personal particulars, employment history, qualifications, current and all-inclusive expected salaries before 25 June 2008, maximum 300Kb, MS Word or Open Office. Applications with PDF or other format will not be entertained. Application or enquiry shall be forwarded to bamint_l@yahoo.com.

Posted by BAM International
Perkantoran Taman Pondok Kelapa A/14, Jakarta 13450 , Indonesia
email: bamint_l@yahoo.com

Source: http://jakjobs.com

Read More