Stoner wins, Pedrosa second, Rossi falls - championship open

Race in Assen today once again proved that when Casey Stoner finds right set-up, which was obviously case this weekend, he is unstoppable. After taking first place from Pedrosa, Stoner checked-out and finished race in first place, more than 11 seconds in front of Pedrosa, bringing first victory to Ducati, Bridgestone and himself on Dutch circuit. Dani Pedrosa rode lonely race in second place, but this was enough for him as Rossi crashed in lap 1 bringing Randy de Puniet with him. Rossi managed to re-join the race and finish in 11th place, but new championship leader is now Pedrosa, who is 4 points ahead of Rossi. Final podium step has gone to Colin Edwards, who profited from bad luck of Nicky Hayden, who run out of fuel in last corner, and had to give his deserved 3rd place to fellow American.

Inertion brought Nicky Hayden to 4th place, while Andrea Dovizioso once again managed to finish in top 5. Jorge Lorenzo once again gradually improved through the race to finish in 6th, running out of time to improve further. Chris Vermeulen was 7th today, edging Shinya Nakano for this position. James Toseland was 9th, while Sylvain Guintoli shown signs of improvement on Ducati by taking 10th place.

After reaching halfway point today, MotoGP championship is still open - Pedrosa and Rossi are still in significant advantage over Stoner (25 and 29 points, respectively), but astonishing form that Stoner demonstrated in last few races shows that his chances for title defense are more than good.

Source:
http://www.highrevs.net


Repsol Honda wants to retain championship lead in Sachsenring

2008-07-04
Repsol Honda rider Dani Pedrosa will be aiming to cement his World Championship points lead at the Sachsenring where last year he scored a dominant win and team-mate Nicky Hayden took third place to give Repsol Honda its first double podium of 2007. Pedrosa retook the 2008 points lead with a fine ride to second place at the recent Dutch TT, while Hayden came close to completing the team’s first double podium of the year.

This is the busiest time of year for the Repsol Honda Team – the German GP is the fifth MotoGP round in just seven weeks and is immediately followed by next weekend’s US GP. Pedrosa, Hayden and their crews are thus working very hard. Pedrosa knows he needs to find a few extra tenths to strengthen him World Championship charge while Hayden is getting to grips with Honda’s pneumatic-valve engine which he raced for the first time at Donington Park, the weekend before Assen.

The German GP sees the MotoGP circus switch from one historic race venue to another. The original Sachsenring street circuit was first used for racing in the late 1920s and hosted the first GP behind the Iron Curtain in 1962. The track regularly attracted crowds of 350,000 and was last used for World Championship racing in 1972. Following reunification a Sachsenring short circuit was constructed. The venue hosted its first GP in 1998 and since then has undergone substantial upgrades. It is now a complex and challenging circuit, with an ultra-tight first section that leads into a rollercoaster series of high-speed left-handers that are its dominant feature.

Dani Pedrosa
We are working very hard at the moment, trying to improve our performance. We will do our best to repeat my 2007 German GP win but we know it won’t be easy. Sachsenring is quite a slow track, most of the corners aren’t so fast. My favourite section is the final, faster part: the fast, downhill right-hander near the end of the lap and then the uphill run into the final corner. There is always a good atmosphere at this race with a lot of fans and overflowing grandstands. The track was resurfaced for last year’s race which made it a lot better because before it was very bumpy. Set-up is always difficult at Sachsenring because it’s a long race, so you need a harder-than-normal compound on the left side of the tyres. You use quite a static riding style here, riding more gently and making fewer movements than usual on the bike.

Nicky Hayden
The bike is working good, the engine is running plenty good, but we just had that little issue at the end of Assen which stopped me getting third. I’m sure the guys at HRC will have the electronics all fixed for this race because I quite like the Sachsenring and I’ve always gone pretty well there. It’s a short little lap and some people complain it’s too tight and twisty but I like fast left-hand corners and it’s got a lot of them. I’m a dirt tracker so I like going left! The first bit is quite technical, then you’ve got that fifth-gear drop-off round the back which is really good, definitely one of the best. The key for going down that hill is getting the bike so you’re confident in the front. The next right-hander (Turn 12) is a big one, it’s blind and it’s downhill, so you can’t go tip-toeing through there if you want a good lap, you’ve got to be committed and charge it. Last year the track had a new surface because tyre wear had been a big issue there.

Source:
http://www.highrevs.net

Suzuki PTR Stealth

Story: Ken Wootton
Photos: Arthur Thornton & KW

Could this be the world's most sorted GSX-R1000? With the same rear-wheel power as Shawn Giles' Superbike, the PTR Stealth packs one helluva ride...

"Excuse me officer, I was wondering if you could help me out? You see, I've got this bit of plastic with my face on it that says I'm allowed to ride a motorcycle.

"And we can save each other a lot of hassle and paperwork if you just take it off me right here and now and look after it for the next month - maybe even the next six if you feel like it."

Those were the thoughts running through my mind as I buttoned off the throttle and let the PTR Stealth approach the looming 60kmh speed sign at a velocity that would hopefully prolong my legal riding rights at least long enough for me to grab a cappuccino and a lemon tart at the Yea bakery.

What's that they say about the condemned man ate a hearty meal? Hopefully my last food intake won't be limited to a frothy chocolate stain under my snout and tightly pursed lips from a tangy tart...

SELF-INFLICTED PAIN
My sustenance stop gave me time to recap on the past couple of hours in the saddle of the Stealth - as well as giving my lacerated right knuckle time to regain some feeling.

Lacerated knuckle? I'd like to pretend it was from hanging on to the 'bars of the 173ps weapon as the front end pawed skywards, the rear tyre spitting gravel chips out the back as the Stealth rocketed out of the turn and towards the horizon like the F-117 bomber it's named after.

Sadly my self-inflicted injury wasn't quite that glamorous. Those 'petal' discs on the $40,000 PTR GSX-R1000 Stealth may look the business, but they sure know how to slice a polishing hand to the bone if you're not paying attention.

Still, my throbbing knuckle was a small price to pay for a gallop on what has to be one of the most exhilarating rides on two wheels. Errr, make that one wheel...

PROVEN LINEAGE
You see, the 'PTR' refers to Phil Tainton Racing, the performance house which runs Suzuki Australia's road racing effort. The very same PTR which has guided Shawn Giles to the past two Australian Superbike Championships - 2000 on the FIM-spec GSX-R750, and 2001 on the then-new GSX-R1000.

And Gilesy looks odds on to make it three in a row in 2002 with a healthy 67pt lead and only one round to run (with 76pts up for grabs) in this year's championship, at Sydney's Eastern Creek Raceway on November 8-10.

Okay, it goes without saying that PTR knows how to screw a GSX-R1000 together. So good in fact that the road-going Stealth pumps out 12ps more at the rear wheel than last year's championship-winning GSX-R1000 - and exactly the same 173.3ps as Gilesy's current racebike. Yeehaa...

The reason for the horsepower boost is that this year's Aussie SBK regs allow for the fitting of race camshafts, which when combined with a full season of development and some careful PTR remapping of the fuel-injection system have unleashed the additional ponies.

Compare that 173.3ps to the 144ps that a stock GSX-R1000 testbike pumped out in AMCN's recent Big-bore Sportsbike Shootout (Vol 52 No 2), or the 129ps that a CBR954RR FireBlade develops, and you don't have to be a Einstein to realise the figures are impressive. Damn impressive. Check those dyno graphs on page 27 if you need further convincing.

MAJOR EFFORT
Of course, just like the television ad says, power is nothing without control. And that's where the Stealth shines.

In fact, the powerplant is so well sorted that at first I was lulled into a false sense of security as to just how potent this thing is.

Up to around 5000rpm there's not much to separate the PTR Stealth from a stocker in rear-wheel power, and in fact the stocker arguably has slightly more torque. That's no doubt a trade-off with the Stealth's Yoshimura full-race cams, the very same ones that Giles' #1 Superbike uses.

But from 5K onwards the Stealth just builds and builds and builds until it becomes a major physical effort just to hold on.

This is one of the few streetbikes that could benefit from a bum pad to keep the pilot locked in place. But I guess you'd expect that with around 20 percent more mumbo to play with at 11,000rpm than on a stock GSX-R1000. And believe me, a stock GSX-R1000 is no limp biscuit. Yikes!

The slightly higher Powerbronze screen was a help here, as it kept some of the windblast off my shoulders and bonce, but there's no doubt a Giles-type riding style is encouraged - push forward on the pegs, pull forward with your arms, and keep your head and weight well forward.

With the Stealth's PTR footpegs set 30mm back compared to the stock pegs the rearset brackets help immeasurably with this 'push forward' technique, although the 25mm-higher positioning of the pegs saw my gangly pins getting a little cramped on longer road rides. Swings and roundabouts I guess.

While on the topic of Powerbronze, the Stealth also wears that company's carbon-fibre rear hugger ($240) and snazzy rear inner guard, complete with two classy taillights. It really looks the business and gives the GSX-R1000 rear-end a far more aggressive look. Money well spent at $335 I reckon.

INSTANTANEOUS EXPLOSION

Explosive is the word that best describes the Stealth's acceleration. Instantaneous horsepower. Bloody awesome.

It's the instant response that is frightening - not because it's scary frightening, but because it's just so well sorted. What ever you do at the throttle, you get at the rear wheel. I'm not sure how many hours Mr Tainton spent on his inhouse dyno to get the fuel-injection mapping sorted, but the $280 he charges for a GSX-R1000 fuel map is money well spent.

Where the Stealth varies from the Giles Superbike is that it uses a $995 Yoshimura EMS system rather than a Dynojet Power Commander, although both essentially do the same job - and that's to allow the engine's fuel-injection 'brain' to be accessed. The days of simply swapping jets and needles on carbed sportsbikes when you fit an aftermarket exhaust are seemingly long gone...

There's also an EMS accessory 'hub' (for an extra $980) that includes a powershifter, shiftlight, rev limiter adjustment and three-way switch on the handlebar to select alternative maps. Phil had disconnected the powershifter on the Stealth for the simple reason that powershifters work best when changing gear at full noise. Fine for the racetrack, but not ideal for road use, where anything less than a full-noise gearshift results in a clunky change and a massive thump in the small of your back.

Believe me, flat-shifting the Stealth at 11,000rpm on public roads is not something to be attempted by the faint-hearted - let alone anyone who wants to hold on to their licence...

Best leave that powershifter in the box for trackdays - or posing at the local latte hangout on Sunday morning.

AMAZINGLY EASY
Despite the prodigous power output of the Stealth, it's an amazingly easy bike to ride slowly. I even dropped to 2000rpm in top gear and it pulled away without a hint of transmission snatch.

There's no way I could have done that on Gilesy's 1993 Peter Jackson YZF750 Superbike (which incidentally tried to loop me staright off the back at Phillip Island's Siberia!) or the Marty Craggill Muzzy Kawasaki ZXR750R (which tried to spit me off down Phillip Island's front straight every lap). Both of those bikes had light-switch power delivery that was downright intimidating - and a powerband kick that makes an Aprilia RS250 feel like a Postie bike in comparison.

Despite loads more horsepower, the Stealth is a totally different beast. I managed to score it a couple of times on wet and miserable evenings for the ride home from Horror HQ to Chez Woose, through the challenges of Melbourne peak hour and slimey tram tracks. Interesting...

Truth be known, some of my colleagues were avoiding the Suzi key for fear of the rear hoop breaking loose unexpectedly in such conditions and dumping them and $40K worth of GSX-R on their collective sides. I had no intention of informing them what a pussy the thing could be if ridden accordingly.

Mind you, the couple of wet nights is what led to my lacerated knuckles. Not only is the Stealth full of go, but it's got a fair amount of show as well.

And that's how I got caught out by the 'petal' discs in one of my washing and polishing frenzies. Ouch.

Speaking of the discs, I was impressed by the additional bite the Braking items offered over the stock GSX-R1000 units, which feel a bit wooden with the standard pads. Sure, the stock items work okay once a bit of heat has been generated, but that's not always possible in road use.

The Braking rotors improved both feel and bite, although the Goodridge braided lines no doubt assist in that regard as well.

OHLINS MAKEOVER
The brakes aren't the only chassis improvement on the Stealth, with both ends copping an Ohlins make-over. The fully-adjustable forks look just like the top-shelf $10K full-race Ohlins items, but are in fact lower-spec 43mm road/track versions (at $3700). Nevertheless, they're something Giles can't use on his Superbike as the Aussie rules require stock forks. Score one for the Stealth.

The Ohlins unit at the rear is the same twin-speed (high and low-speed damping) unit that adorns Gilesy's Superbike. At $1769 it's not cheap, but it's certainly the duck's guts.

Tainton has revalved the shock to exactly the same spec as Giles uses on his #1 racebike, although the Stealth uses a 8.0kg spring opposed to the 7.5kg item on the Superbike. What, a heavier spring on the roadbike?

"Shawn prefers a slightly softer spring and a bit more preload," explains Tainton. "It's just a metter of personal preference."

Either way, the Stealth is firmly suspended, and that means the ride can be quite 'harsh' at slower (ie legal!) speeds.

It needs to be firm though, as with that much instant power you don't want the rear-end squatting every time the throttle is twisted.

The Stealth is one of those bikes that gets better and better the faster you ride it. It's probably an ideal Isle of Man bike, but I don't think I can match David Jefferies laptimes on his GSX-R1000 to find out.

Mind you, Gilesy doesn't think the Stealth is too firm - probably because it's got a normal seat rather than the little pad he's used to on the #1 bike. After his 'running-in' session on the Stealth at Sydney's Eastern Creek Raceway he was full of praise.

"It's fantastic - it's got as much power as my racebike bit it's more comfortable."

SIMILAR SPECS
The Stealth cops similar chassis specs to the Giles bike as well, although not quite as radical. The rear ride height has been raised fractionally, which quickens the steering a tad, but there was no instability trade-off that I could find.

Then again, I wasn't lapping the Isle of Man at an average of over 120mph, so it's a bit hard to tell. Either way, the Ohlins steering damper could well have not been there so true did the Stealth track on the road.

And that just about sums up the PTR Stealth. All the performance mods on the bike have been tested and proven in the hotbed of competition, with a dyno graph that offers proof of its lineage from the #1 Superbike of Gilesy.

It's a far closer 'replica' to the real thing than any road-going HSV Commodore could hope to be. HSV GTS versus Mobil HRT Commodore, or Stealth versus Team Suzuki GSX-R1000 Superbike? No contest as to which is the real replica.

In fact, take off some of the add-on parts illegal under current Aussie Superbike rules (Ohlins forks, brake rotors, etc), fit some slicks, and I've no doubt Gilesy could go out and win a race on the thing - lights, mirriors and rego plate included!

KNUCKLING DOWN
Okay, I'm not going to pretend that $40K is a bargain for a hotted GSX-R1000. But have a look through the shopping list on page 22, and put a line through some of the cosmetic enhancements that you'd be willing to sacrifice in the name of budgetary constraint.

Now add those items up, then use the savings to attend numerous performance riding schools. Now you've got no excuse. Jump on that PTR-modded GSX-R1000 and go and win yourself an Australian Superbike Championship.

Of course, if you're like me you'll leave the Stealth just as it is and continue to blame your lacerated knuckles for holding back your racing career.

Source:
http://www.bikepoint.com.au

Kawasaki ZX-10R

Kawasaki has released details of its ZX-10R sports flagship, due to arrive in Australia early in 2004. The basic stats reveal a 170 kilo claimed dry weight, matched to a 175ps static power output (and 115Nm of torque at 9500rpm) that balloons out to 184ps at 11,700rpm with the ram-air effect included. This gives it the power-to-weight crown for the time being, narrowly pipping Yamaha's claim for the new R1 - 180 horses for 173 kilos. This compares with Suzuki's current GSX-R1000 at 165 horses 'battling' to push 168 kilos.

Kawasaki says the development of this machine was different to its usual practice, with the design process beginning with chassis simulations. In short it runs an all-aluminium frame and a long "rigid gull" swingarm, which are part of a package the company says has 600 sport bike dimensions. Overall length is 2045mm for a wheelbase of 1385 and seat height of 825mm.

There's a long list of fairly exotic gear, including a built-in immobiliser, a two-in-one instrument cluster that has the digi speedo centred in the analogue LCD tacho dial, titanium exhaust with aluminium wrap on the muffler, and a mini clutch-driven generator that runs at twice engine speed. Perhaps most intriguing is the "petal disc" design used for the brake discs - so-called because of the uneven outer edge - which is a first on a road bike. Kawasaki claims they have cooling benefits. Calipers are a four-pot radial design up front and single piston rear.

Australian colours will be green, black or orange. Here's a selection of the factory technical info.

Engine

  • Liquid-cooled, DOHC, 16-valve, 998 cm engine has a bore and stroke of 76 x 55 mm.

  • Huge 43 mm throttle bodies fitted with dual throttle valves ensure massive power output and a smooth, step-free torque curve.

  • Automotive-type fine-atomising injectors improve performance, fuel economy and emissions. While fuel spray from conventional injectors has a droplet size of 120 microns, the fine atomising injectors have a droplet size of approximately 70 microns.

  • Flow analysis used to develop idealised dimensions for intake and exhaust ports, ensuring efficient cylinder filling and high power output (intake/exhaust valve diameters: 31/25.5 mm, stem diameter: 4.5 mm). Titanium exhaust valves contribute to reduced engine weight.

  • Hotter spark of the iridium plugs and high-voltage coils improves combustion efficiency.

  • Camshaft lobes and tappet surfaces feature soft-nitriding surface treatment for long wear and high-rpm reliability.Sintered aluminium valve spring retainers reduce reciprocating weight for reliable valve control at high-rpm.

  • Forged pistons are lightweight and very tough, for low reciprocating weight and high heat resistance. Their flat tops enable a compact combustion chamber with improved combustion efficiency. Compression ratio is 12.7:1.

  • Plated cylinders are long wearing and offer excellent heat dispersion. Passageways in cylinders improve crankcase breathing and reduce pumping loss.

  • Intake air is routed via the central Ram Air duct and through the frame tubes to the airbox. A duct between the frame and the air cleaner prevents ingress of water.

  • Compact air cleaner fits snugly between the frame rails, allowing use of a seamless, high-capacity, flat-bottomed fuel tank. Flow analysis was also used to ensure efficient air flow inside the airbox.

  • Butterfly valve located in the cast titanium collector of the exhaust system ensures smooth, linear power delivery at all rpm.

  • One-piece cylinder/crankcase design, compact rear-mounted generator, compact cylinder head and "stacked" tri-axis transmission/crankshaft layout allows an amazingly compact and lightweight engine, permitting the crankshaft location to be idealised and the bike's centre of gravity to be lowered, thereby contributing to the bike's highly responsive handling characteristics. The engine is short enough to fit below the twin beams of the frame, allowing the 10R to have the narrow compactness of a 600-class machine.

  • Single valve springs use oval-section wire to realise short springs and a compact cylinder head design.

  • Camshafts are machined from forged billets of SCM420K steel for light weight and high strength.

  • Lightweight magnesium engine covers contribute to the engine's low weight.

  • Newly designed liquid-cooled oil cooler with internal aluminium finning is lightweight and keeps oil temperatures under control.

  • All-titanium exhaust system and oval-section muffler with titanium internals and a 1 mm thick aluminium cover designed for light weight.
Chasis
  • The all-aluminium twin-beam frame is a composite structure of castings and pressings. Lightweight and very compact, it features a short wheelbase and a long swingarm.

  • The frame's thin walled die castings are a mere 2.5 mm thick for maximum strength with minimum weight.

  • Use of a cast cross pipe results in fewer parts and less welding.

  • Frame rails run over the engine to give it a width on par with current 600-class bikes.

  • Front fork features many aluminium internal components to reduce weight.

  • Lightening holes in the top triple clamp contribute to the machine's overall light weight.

  • Forged aluminium handlebars are gun-drilled for light weight.

  • Other lightweight chassis components include dual aluminium steering stem nuts, lightweight pop nuts for the bodywork and aluminium rear-suspension bearing arm sleeves and wheel side collars.

Wheels

  • Lightweight new front and rear wheels feature "H" cross-section spokes. The unique, 6-spoke design permits use of thinner rims, for significant weight savings.

Frame

  • Like the ZX-RR, the 10R chassis minimises the distance between the steering stem and swingarm pivot to create a compact, responsive package.

  • Massive braced swingarm delivers the rigidity needed for a machine with the ZX-10R's horsepower. Long swingarm design reduces the engine's leverage on the rear suspension, for excellent suspension action and superb road holding qualities.

  • Specially configured for high torsional rigidity and more flexible lateral rigidity, this "balanced flex" contributes significantly to the 10R's brilliant handling qualities.

  • Amazingly lightweight, the swingarm weighs about the same as the ZX-6R swingarm.

Brakes

  • The Ninja ZX-10R is the first supersport bike to feature petal brake discs. This unique disc shape improves cooling and helps prevent disc warp. They are also lighter than conventional discs.

  • Front discs are 300 mm. Radial 4-pot opposed-piston callipers deliver impressive stopping performance with excellent feel at the lever.

Suspension

  • Highly rigid 43 mm inverted fork is fully adjustable and features settings that are biased towards track riding.

  • A new super-hard DLC coating (Diamond-Like Carbon) has been added to the outer surface of the inner fork tubes to reduce sliding friction (stiction) and improve action, especially in situations where the suspension is subjected to heavy loads, such as during braking or when banked over. While the coating provides its greatest benefits on the racetrack, street riding is also notably smoother. The increased surface hardness also helps to prevent scratches and damage to the tubes.

  • Both front and rear suspension are fitted with top-out springs for stable suspension performance. Because the top-out springs regulate suspension elongation, the rider will also experience less nose dive feel under heavy braking after hard acceleration, as well as greater stability when getting back on the gas after hard braking.

  • Linkage-equipped rear gas shock with reservoir is fully adjustable.

  • Lightweight aluminium suspension linkage reduces chassis weight and contributes to the responsive rear suspension action.

  • Rear ride height is shim-adjustable.
Source:
http://www.bikepoint.com.au

Asus P735

Specifications
Asus P735
Network2G
3G
GSM 900 / 1800 / 1900
UMTS 2100
SizeDimensions
Weight
Display
109 x 59 x 19 mm (4.29 x 2.32 x 0.75 in)
143 gram
TFT resistive touchscreen, 65K colors
240 x 320 pixels (~143 ppi pixel density)
MemoryPhonebook
Call records
Internal
Card slot
Yes
Yes
256 MB, 64 MB RAM
miniSD
DataGPRS
EDGE
3G
WLAN
Bluetooth
Infrared port
USB
Class 10

384 kbps
Wi-Fi 802.11b/g
v2.0

v1.1
FeaturesOS
CPU
Messaging
Ringtones
Browser
Radio
GPS
Games
Camera
Video
Colors
Java
Microsoft Windows Mobile 5.0 PocketPC
Intel XScale 520 MHz
SMS, MMS, Email, Instant Messaging
Vibration; downloadable polyphonic, Midi, MP3 ringtones
WAP 1.2.1/2.0


Yes
2 MP, 1600 x 1200 pixels, autofocus, LED flash
Yes
Silver
MIDP 2.0
- Mini-SIM
- VGA videocall camera
- Video download
- Pocket Office
- Windows MPlayer 10
- Text to Speech
- Organizer
- Voice memo
- Stopwatch
- Clock
- Calendar
- Alarm
Battery
Stand-by
Talk time
Standard battery, Li-Ion 1300 mAh
Up to
Up to

Image: http://www.gsmarena.com/asus_p735-pictures-1831.php

LG CU915 Vu

Specifications
LG CU915 Vu
Network2G
3G
GSM 850 / 900 / 1800 / 1900
HSDPA 850 / 1900
SizeDimensions
Weight
Display
108 x 54.9 x 13 mm (4.25 x 2.16 x 0.51 in)
89.6 gram
TFT resistive touchscreen, 256K colors
240 x 400 pixels, 3.0 inches (~155 ppi pixel density)
MemoryPhonebook
Call records
Internal
Card slot
500 entries
40 dialed, 40 received, 40 missed calls
128 MB
microSD
DataGPRS
EDGE
3G
WLAN
Bluetooth
Infrared port
USB
Yes
Yes
HSPA 3.6/0.384 Mbps

v1.2 with A2DP

2.0
FeaturesOS
CPU
Messaging
Alert
Browser
Radio
GPS
Games
Camera
Video
Colors
Java


SMS, EMS, MMS, Email
Vibration; Downloadable polyphonic, MP3 ringtones, composer
WAP 2.0/xHTML, HTML


Yes
2 MP, LED flash
320p
Black
MIDP 2.0
- Loudspeaker
- Mini-SIM
- Flash UI
- Downloadable wallpapers
- Video-calling
- MP3/AAC/AAC+/eAAC+/WMA player
- Video player
- Document viewer (Word, Excel, PowerPoint, PDF)
- AT&T mobile TV (CU920 only)
- Organizer
- Voice memo
- Clock
- Calendar
- Alarm
Battery
Stand-by
Talk time
Standard battery, Li-Ion 1000 mAh
Up to 250 h
Up to 3 h

Image: http://www.welectronics.

LG G7020

Specifications
LG G7020
Network2G
3G
GSM 900 / 1800
SizeDimensions
Weight
Display
88 x 45 x 22 mm (3.46 x 1.77 x 0.87 in)
89 gram
STN, 65K colors
128 x 160 pixels, 10 lines
MemoryPhonebook
Call records
Internal
Card slot
255 entries, 7 contact groups
20 dialed, 20 received, 20 missed calls

DataGPRS
EDGE
3G
WLAN
Bluetooth
Infrared port
USB
Class 10




Yes
FeaturesOS
CPU
Messaging
Ringtones
Browser
Radio
GPS
Games
Camera
Video
Colors
Java


SMS, EMS
Vibration; Downloadable polyphonic ringtones
WAP 1.2.1


Yes


Silver, Blue, Red

- Mini-SIM
- Second display 96 x 64 pixels
- Blue backlight
- Downloadable wallpapers
- 100 short messages
- 10 voice dial numbers
- 90 sec voice memo
- 20 calendar events
- Predictive text input
- Organizer
- World clock
- Voice dial
- Voice memo
- Clock
- Calendar
- Alarm
Battery
Stand-by
Talk time
Standard battery, Li-Po 820 mAh
Up to 200 h
Up to 4 h

Image: http://www.welectronics.com/gsm/

Archive