Aprilia RS 250 (2001)

Technical Specifications
2001 Aprilia RS 250
Engine
Engine type
Bore x Stroke
Displacement
Valves
Compression ratio
Max Power
Max Torque
Fuel system

Transmission
Final drive
Clutch
Ignition type
Starting system
Lubrication
Exhaust system
Spark plug
Alternator
Gear ratios

Liquid cooled, v-twin cylinder, two stroke
56.0 x 50.6 mm
249cc
4 valves per cylinder
13.2:1
72.5 hp (54.6 kW) @ 11900 rpm
40 Nm (29.5 ft. lbs) @ 10750 rpm
Mikuni TM 34 SS with flat valve, with electronic management by
electrovalves that section the maximum air passages and the idling circuits
6-speed
Chain
Multiple discs in an oil bath
CDI digital, with advance mapping programmed on three perameters
Kick starter


Dimensions
Frame type

Rake/trail
Overall length
Overall width
Overall height
Wheelbase
Seat height
Ground clearance
Weight
Fuel capacity
Color
Suspension (front)
Suspension (rear)
Tyre (front)
Tyre (rear)
Brake (front)
Brake (rear)

Inclined double beam in an alloy of alluminium and magnesium with thin
wall shell structure. Sleeve and side plates cast in an alloy and magnesium

1980 mm (78 inches)
690 mm (27.2 inches)
1090 mm (42.9 inches)
1365 mm (53.7 inches)
810 mm (31.9 inches)

140 kg (308.6 pounds)
16.5 litres

Fork with upside-down rods in high resistance steel, 40 mm
Swinging rear fork in alloy of alluminium and magnesium
120/60-R17
150/60-R17
Dual 298mm discs with four-piston calipers
Single 220mm disc with two-piston calipers

Image: http://www.motorcyclenews.com/bike-reviews/aprilia/rs250/1994/

Archive